Sure Level 4000 Grey 20kg Rubber Based Tile Adhesive
Description
Sure Level 4000 Rubber Based Tile Adhesive
Rubber Adhesive
PRODUCT
Sure Level 4000 Rubber is a deformable, quality cement-based adhesive that meets and exceeds the requirements of Australian Standard AS 4992.1. Sure Level 4000 Rubber is classified as a Normal Setting Flexible (C1) adhesive. Sure Level 4000 Rubber is suitable for interior or exterior bonding of all types of tiling applications. Sure Level 4000 Rubber has versatility in use in bathrooms, toilets, kitchens, laundries and patios.
DESCRIPTION
Sure Level 4000 Rubber is an off white or grey powder composed of graded silica sand cement and synthetic resins and property enhancing additives.
RECOMMENDED USES
- Ceramic wall and floor tiles including monocottura, slate, quarry tiles, terracotta, porcelain and natural stone bonded to concrete and cementitious screeds.
- Brick work, block work, fibrous cement sheeting and where the surfaces are rigid and may or may not exhibit some surface texture and porosity.
- Sure Level 4000 Rubber is suitable for bonding tiles to cement sheet or similar wall systems and where heavy stresses may be encountered, such as under floor heating installations.
- Suitable for thick or thin bed tile installation and over approved water proofing membranes.
FEATURES & BENEFITS
When mixed with water the following features are obtained.
- Single component flexible adhesive.
- Easily workable.
- Bonding of a range of common tile types and substrates.
- Low shrinkage.
- Open time approximately 30 minutes.
- Pot life approximately 4 - 6 hours at 20°C.
LIMITATIONS
Sure Level 4000 Rubber should not be used where:
- The substrate is subject to movement.
- On plastics, metals that will rust or oxidise, oil treated timber.
- For Swimming pools or permanent wet areas.
- On painted surfaces.
Features
- Rubber Modified Tile Adhesive
Variations
Reviews
No reviews found