Sikadur 31 / SIKADUR-41

Sikadur 31

Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions thereby providing an adhesive mortar ideally suited to site application. It is available in three grades: rapid, normal and long pot life for low, medium and high ambient temperatures respectively.

USE

Sikadur-31 may be used as a thin layer levelling mortar, repair mortar or adhesive for most building materials (concrete, brick, stone, ceramics, cement mortar, GRC, fibrous cement, iron and steel and epoxy mortar). Sikadur-31 may also be used to anchor holding down bolts, starter bars etc. as a bonding bridge between old concrete and Sikadur-41 mortar. The material is also ideally suited for bonding of external reinforcement and as a general structural adhesive. Special higher strength grades of the material are available for segmental bridge and other construction.

CHARACTERISTICS AND ADVANTAGES

• Chemical resistant
• Insensitive to moisture during application, cure or whilst in service
• Applicable at low temperatures
• Excellent adhesion to most building materials even when damp
• High abrasion resistance
• Approved for use in contact with potable water
• High early strength
• High tensile and flexural strength
• Supplied in factory proportioned units
• Easily applied – thixotropic, non-sag
• Proven in service
• Shrink free
• Two components of different colours enabling visual control of degree of mixing.

COLOUR

Part A – White Part B – Dark Grey Mixed product uniform grey colouration

PACKAGING

6 kg pre-batched unit

Mixing Ratio (A:B = 2:1)

SIKADUR-41

High strength, epoxy resin patching mortar:

• Suitable for use as a repair or patching mortar in concrete, cement and stone
• Approved for contact with potable water
• Insensitive to moisture during application, cure or service, shrink free and chemical resistant

USE

Sikadur® 41 may be used as a repair or patching mortar for many mineral substrates including concrete, cement mortar and stone. The ease of application and tolerance of site conditions ensures the product can be used to repair or restore profiles on pre-cast or cast in situ concrete elements as well as a general void filler for both vertical and overhead work. Suitable also as an abrasion and impact resistant coating.

CHARACTERISTICS AND ADVANTAGES

• Insensitive to moisture during application, cure or whilst in service
• Bonds to damp concrete
• Applicable at low temperatures
• Available in two grades (Normal and Long Potlife)
• High abrasion and impact resistant
• High early strength
• Approved for contact with potable water
• High tensile and flexural strength
• Supplied in factory proportioned units
• Easily applied
• Resistant to dilute acid, alkalis and most oils etc.
• Proven in service
• Shrink free
• Two components of different colours enabling visual control of degree of mixing

PACKAGING

12kg Kit

COLOUR

Mixed product uniform grey colouration