Sika Grout Fluidifier 5kg Grout/Mortar Admixtures
Sika Grout Fluidifier
SikaGrout Fluidifier is a dual component, powder admixture formulated to achieve mild plasticising effect with slight extended set time for general purpose grouts and mortars.
USE
SikaGrout Fluidifier is suitable for:
- Lean sanded grouts to fill voids and support.
- Grouting where load bearing is not required.
- Pre-placed aggregates.
- Grouts requiring pumping into hard to reach places.
- Cement or Cement/fly ash for rock grouting or soil stabilisation.
CHARACTERISTICS AND ADVANTAGES
Lubricates the grout mix.
- Extends holding time and penetration at the point of use.
- Ensures complete filling of the grouting space.
- Reduces pumping pressure by lowering viscosity of grout mix.
- At higher temperatures, normal setting can be experienced.
COLOUR
Grey
PACKAGING
5 kg degradable bag
Compatibility
Please check compatibility when using with other admixtures.
For additional information, please contact your local Sika Representative.
Dispensing
To achieve a good technical performance of the product, “thorough mixing to dissolve the bag is essential”. This can be achieved by either:
- Introducing and premixing the product with initial gauging water at high revolutions of the mixer drum for 60-90 seconds and then adding other mix constituents.
- Or add SikaGrout® Fluidifier before batching the grout. The batching sequence should allow for a portion of sand (approximately 20%) to be added and mixed for 30-60 seconds to assist the dispersion of the product. Batching can then proceed as “normal”.
Recommended Dosage
Typical dosage is 5 kg/m³ (i.e 1 bag/cubic metre) for general-purpose grout. An increase in dose rate is permissible for increased fluidity within specified limits for various combinations of materials or brands of cement. Laboratory and field trials are essential in determining the optimum dosage.
No reviews found
