Sealers Plus Grip It 1 Litre Anti-Slip Treatment

Grip-It T

Anti-Slip Treatment for Ceramic and Porcelain Tiles.

GRIP-IT T – Permanent Anti-Slip Treatment for Ceramic, Porcelain & tessellated Tiles

Grip-It T™⠀is a permanent treatment to create a slip resistant micro-texture. It is NOT a sealer or a coating. It will not peel or wear off. Makes slippery, wet surfaces safer e.g. bathrooms, swimming pool areas, balconies, living areas, main entrance etc. 

⠀USE

For glazed and unglazed ceramic, porcelain and tessellated tiles in domestic, commercial, indoor and outdoor areas. For homes, hotels, motels, resorts, schools, child and aged care facilities, supermarkets, restaurants, bars etc

Key Features

• Makes Slippery Surfaces Safer & Slip Resistant
• Creates Slip Resistant Microtexture to Treated Surface
• Professional Grade Formula – Non Coating, Non Yellowing
• Ideal for Domestic, Commercial, Indoor and Outdoor Areas

TEST FIRST

Always test first in an inconspicuous area to determine ease of application, dwell time, colour stability and desired results. End user must determine suitability of product for their own use.

⠀PRECAUTIONS

1. Read entire label, SDS and technical bulletin before using;
2. Use when surface temperature is between 4°C & 32°C;
3. Do NOT pour in metal containers & remove all jewellery first;
4. Do NOT allow product to come in contact with any acid sensitive, polished or non-recommended surfaces;
5. Do NOT mix with ammoniated cleaners or any other chemicals;
6. May affect dark grouts, grout colorants & polished surfaces;
7. Depending on how much anti-slip micro-texture is created, some dark coloured tiles can lighten in colour & polished porcelain will start to lose it’s polished finish going from polished to satin to matt

⠀SURFACE PREPARATION

Use XtremeClean as per label to ensure a clean, dry surface before starting.

⠀HOW TO USE

1. Sweep, vacuum or wipe for a clean, dry surface;
2. Pour⠀Grip-It T⠀into a PLASTIC paint tray, bucket or container; 
3. Carefully apply⠀Grip-It T⠀evenly to surface with a suitable sponge, brush, natural bristle broom or mop – do NOT spray;
4. DO NOT POUR DIRECTLY FROM BOTTLE TO THE SURFACE;
5. Allow to dwell for about 5 minutes at a time -“dwell period”;
6. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE – ADD MORE PRODUCT AS REQUIRED TO KEEP IT WET; 
7. After each 5 minute “dwell period”, test the amount of slip resistance created by using your shoe or a gloved hand in a scuffing/rubbing motion in the standing solution on the floor;
8. When desired level of slip resistance has been created, rinse off thoroughly with clean water;
9. Repeat the process as necessary.