Maxisil P P7 Black 310ml Pool Silicone
Maxisil P – Pool Silicone
Maxisil P is designed for swimming pools, water fountains, public showers, gymnasium & all under water applications.
*Please note that colour samples are not true to the actual colour. This is a guide only.
Maxisil P is designed for swimming pools, water fountains, public showers, gymnasium & all under water applications.
*Please note that colour samples are not true to the actual colour. This is a guide only.
- For interior & exterior use.
- Easy to apply with good tooling properties
- Maxisil P shows an extreme resistance to mould formation.
- Has excellent adhesion to substrates where permanent water/wet stresses occur. Primer needs to be used.
LEARN MORE ABOUT THE MAXISIL RANGE:
| DEPTH OF JOINT | WIDTH OF JOINT | ||||||
| 5mm | 7mm | 10mm | 12mm | 15mm | 21mm | 25mm | |
| 5mm | 12.0* | 8.0* | 6.0* | ||||
| 7mm | 6.0* | 4.0* | 3.0* | ||||
| 10mm | 3.0* | 2.5* | 2.0* | 1.5* | |||
| 12mm | 2.1* | 1.7* | 1.2* | 1.0* | |||
| 15mm | 1.3* | 1.0* | 0.8* | ||||
*Metres per 300/310ml cartridge
Note: These values are approximate and serve as a rough guide for right-angled joints. The depth of the joints is measured to the rear of the profile.
The authorised dimensions of the joints are governed by DIN 18540. Accordingly, all exterior expansion and connection joints must have a minimum width of 10mm and a maximum width of 35mm. Up to a width of 15mm, the depth of the joint should correspond to the width. If the width of the joint exceeds 15mm, then the depth should be approx 2/3 of its width.
- Pool Silicone
| Sort by Price (ex GST) | Sort by Grout / Silicone Colour | Sort by Size | |
|---|---|---|---|
Not currently available.
|
|
Grout / Silicone Colour:
|
Size:
|
No reviews found