Vendor productsProducts found: 2097

Elastoproof Corners Prefabricted Corner Sections For use in conjunction with the Elastoproof B50 Joint Band for effective detailing at critical 90° and 270º corner intersections. Prefabricated corners ensure a seamless and elastic seal, overcoming many difficulties when detailing membranes...

Mapei PRIMER G Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous. Dilute Primer G...

High performance cementitious grout, polymer modified, for joints up to 6 mm.

Mapei ISOLASTIC 50 Latex additive to elasticize cement-based adhesives. Isolastic 50 is a latex to be mixed with Kerabond and Kerafloor to improve their performances and deformability to meet the requirements of class C2 (improved cementitious adhesive) according to EN 12004 and those of...

Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. Its easy to use 1:1 mixing make it suitable for onsite applications.

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Mapei ISOLASTIC Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve the performance and deformability to satisfy class C2E (improved cementitious...

Quick Set Additive is a Calcium Chloride based liquid additive designed to make any cement based product set and develop initial strength quickly.

Mapei KERAFLEX High performance cementitious adhesive, with no vertical slip and extended open time for ceramic tiles and stone material. Applications: Interior and exterior floor and wall bonding of all types of ceramic tiles and ceramic mosaics, stone material (as long as moisture stable)...

Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. Its easy to use 1:1 mixing make it suitable for onsite applications.

ARDEX P9 Single Part Primer is a water-based primer used for improving the adhesion of ARDEX products to smooth, dense and various non-porous substrates.

Gripset 38FC is a next generation, water based, fast curing, fibre reinforced SBR latex membrane designed for waterproofing wet areas, showers, laundries, roofs, terraces, balconies, decks, concrete slabs and general structures that will be covered over with toppings, tile beds or overlay finishes.

Information ARDEX FG 8 A smooth, flexible cement-based grout with improved colour integrity. ARDEX FG 8 is suitable for tile joints 1-8mm wide and is exceptionally easy to use on walls and floors. Excellent workability Strong uniform colour Easier to use Smooth finish, flush joints...

Description The excellent thixotropic properties means you can hang tiles on vertical surfaces and there is low shrinkage, which allows for packing up under tiles plumb and level to the wall or floor. Available in a range of colours. White, off white and grey, 20kg Uses...

General Purpose Cement General Purpose Cement is a cost effective, high quality building material. The level of consistency and versatility of General Purpose cement makes it an ideal choice in virtually all construction applications. General Purpose Cement fully complies with the...

Master Flex ECO C2S1T Tradies Choice Master flex is a rubber modified, cement based tile adhesive designed for internal and external applications on b oth walls and floors. Can be used for ceramic, porcelain and vitrified tiles. Tradies Choice Master flex can be used for tiling over...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Special cleaning solution for epoxy grout, suitable for cleaning operations after completing laying work and for removing traces and stains of epoxy grout (such as KERAPOXY, KERAPOXY P, KERAPOXY DESIGN and KERAPOXY CQ) from the surface of ceramic and glass coverings.

ADESILEX P4 Fast-setting cement based levelling compound for internal and external use from 3 to 20 mm thick. Applications: Internal and external levelling compound for all normal supports used in building provided they are clean, such as concrete slabs, cement screeds, old ceramic...

Gripset C-Mastic High Strength Polymer Modified Tile Adhesive Gripset C-Mastic is a high strength polymer modified tile adhesive designed for commercial applications.White and non-slump, C-Mastic has been developed with enhanced fibre technology to provide superior shear strength for large...

Kerapoxy Design is a two-component, decorative, acid-resistant epoxy grout ideal for glass mosaics.

Efflock is a high performance, water based, VOC free, liquid additive designed for the bulk impregnation of cement based building materials to protect against efflorescence and damp.

A SYNTHETIC LATEX BASED PRIMER FOR POROUS SURFACES

Sand & Cement Sand & Cement is a carefully proportioned blend of graded sands and cement, designed for use as a general purpose mortar product. Sand & Cement can be used in certain handyman, landscaping and plumbing applications and is suitable for use with various substrates.