Waterproofing

A set of butyl self adhesive collars containing two collars for a tap spindles and another collar for a shower head.

Protection sheeting is a puncture resistant plastic product used predominantly to protect below ground waterproofing membranes from back fill and root growth.

Alkaline Resistant Fiberglass Wall Mesh 165 G/m²

Gripset 11Y Latex Waterproof Additive High performance latex additive specifically formulated to enhance the performance and durability of cement-based compounds. Improves adhesion strength. Enhances water resistance, gas permeability and waterproof properties. Increases flexural strength,...

Gripset XpressLay Self Adhesive Underlay Gripset XpressLay is a next-generation high strength reinforced self-adhesive PVC sheet that offers unique properties for waterproofing wet area applications, internal and external. At less than 1mm film thickness, XpressLay provides tensile...

LATAPOXY Moisture Shield is a 2 component, roller applied epoxy coating specifically designed to reduce moisture vapour emissions in concrete and other substrates

The Hyperband Internal Corner is used with waterproofing systems to enhance the sealing of substrate junctions, movement joints, cracks and various other areas subject to potential movement. Hyperband Rubberised Joint Band is especially useful for the reinforcing of waterproofing membranes in...

Primer for Bituminous Membranes

Multi-composite Drainage and Protection Boards.

Wedi Drain Kit DN50 (New Click & Seal Drain System) Fundo Click and Seal™ Drain fits all Fundo shower bases (no more changing between drain kits) Drain cover can move both vertically and laterally to accommodate any size tile No plumbing license, glue or sealant needed...

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass.

MAPEGUM WPS DESCRIPTION: Fast-drying flexible liquid membrane for interior waterproofing. APPLICATIONS: Liquid waterproofing membrane for interior surfaces provided they are not continually immersed in water or subject to rising damp. Mapegum WPS can be used on all types of...

Gripset C-PLUG Rapid Set Water Plug Rapid setting, non shrink, cement based compound that forms an instant waterproof seal against active water leaks under pressure. Ideal for active water leakages through holes, cracks and similar openings in concrete and masonry surfaces. Rapid...

Gripset 2P 2 Part Flexible Cementitious Membrane Highly versatile, two component latex cementitious membrane designed for a range of waterproofing applications including internal and external wet areas, immersed and subterranean areas. Developed by advanced polymer technology, Gripset 2P...

Fabric Bandage 125mm X 100m

Vulkem 171 primer is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem urethane sealants, membranes or coatings will be applied.

A set of butyl self adhesive collars containing one collar for a flick mixer and another collar for a shower head.

A set of butyl self adhesive collar made specifically for sealing around 100mm pipes in wet areas such as bathrooms and toilets.

Ready-to-use quick drying and flexible Class III water-based hybrid polyurethane membrane for internal and external waterproofing applications

The wedi Hob can be installed with wedi Fundo shower bases, as well as conventional mortar bed systems.

1Komponent Fibre Reinforced Waterproof Membrane 1Kompönent is one component, flexible fibre reinforced water proof membrane. With a specially formulated cementitious base incorporating graded aggregates and polymers, producing a highly flexible water proof membrane – capable of withstanding...

Ultra fast setting and drying hydraulic binder for plugging water leaks.

Gripset E60 Water Based Epoxy Primer Water based epoxy primer and protective coating against moisture penetration and rising damp. Can be used directly over damp mineral-based surfaces and newly laid "green" concrete. Provides a compatible surface for applying membrane, adhesive and other...

Elastoproof Base Collars Elastic Seal for Pipes and Penetrations Ensures effective detailing and enhanced sealing around penetrations such as pipes, drainage outlets, cabling and any substrate fixtures by protecting against movement, vibration and cracking. Permanent elastic collar...

Gripset C-BED Premium Grade Screed Premium grade, polymer enhanced cementitious compound designed for high performance screeding applications. The unique polymer formulation provides excellent water resistance and high strength properties for use in critical areas subject to continuous...

wedi Building Boards have a blue core made from CFC- and HBCD free extruded polystyrene rigid foam.

Hyperband Rubberised Joint Band is used with waterproofing systems to enhance the sealing of substrate junctions, movement joints, cracks and various other areas subject to potential movement. Hyperband Rubberised Joint Band is especially useful for the reinforcing of waterproofing membranes in...

MAPEBAND Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C.

Davco Lanko K11 Moisture Barrier Is a 2 part, alkali-reactive waterproofer that prevents the transfer of moisture from the slab. Suitable for internal or external application on below grade surfaces and between horizontal structural slabs and toppings to protect against hydrostatic water...

ARDEX P9 Single Part Primer is a water-based primer used for improving the adhesion of ARDEX products to smooth, dense and various non-porous substrates.

Elastoseal® HD is a tough elastomeric tanking membrane. It consists of heavy duty, waterborne modified neoprene that may be reinforced with a non-woven polyester fabric.

One-component primer for cementitious products

Information ARDEX Multiprime ARDEX Multiprime is a water-based primer for improving adhesion of ARDEX products to various porous substrates. Water-based – no solvent hazard Quick drying Improves adhesion Substrates: Fibre-cement sheet Concrete, render, screeds Masonry and...

Gripset E60 Water Based Epoxy Primer Water based epoxy primer and protective coating against moisture penetration and rising damp. Can be used directly over damp mineral-based surfaces and newly laid "green" concrete. Provides a compatible surface for applying membrane, adhesive and other...

Gripset 38FC is a next generation, water based, fast curing, fibre reinforced SBR latex membrane designed for waterproofing wet areas, showers, laundries, roofs, terraces, balconies, decks, concrete slabs and general structures that will be covered over with toppings, tile beds or overlay finishes.

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

Davco PrimeX A technologically advanced acrylic and water based multipurpose primer for use prior to the application of Davco adhesive and waterproofing systems. Suitable for interior and exterior applications. Commercial and domestic walls and floors. Features & Benefits Ideal for...

Bostik Seal N' Flex 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.

HYDRO BAN Fillet & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Fabric Bandage 100mm X 50m

General purpose primer designed for use on porous surfaces. Fully compatible with Bostik tile adhesives and most Bostik waterproofing membranes. Acrylic backbone allows it to be used outdoors. Bostik Multiprime is a milky pink liquid.

Mapeproof Turbo 1k 10kg Polyurethane Membrane ⠀ DESCRIPTION One component, solvent-free moisture curing and rapid drying polyurethane surface membrane with a very low emission of volatile organic compounds. Moisture vapour barrier for cement-based substrates that are not subject to rising...

General purpose primer designed for use on porous surfaces. Fully compatible with Bostik tile adhesives and most Bostik waterproofing membranes. Acrylic backbone allows it to be used outdoors. Bostik Multiprime is a milky pink liquid.

BAT Paint Brush 100mm

All-in-one rapid drying water-based membrane

Gripset Xpress Primer H2O Plus 1 component vapour barrier primer Gripset Xpress Primer H20 Plus is a unique 1 component vapour barrier primer designed for use on concrete, screeds and mineral surfaces. Xpress Primer H20 Plus forms a vapour barrier to prevent blistering and delamination of...

Solvent free primer specifically developed with adhesion enhancing propertieson metals, non-porous, dense and smooth substrates. It is designed for use onboth vertical and horizontal surfaces, achieving high adhesion without the needfor etching or using solvents. Ideally suited for the application of Gripsetmembrane coatings, adhesives and mortars to enable ease of bond to difficultsubstrates.

Fabric Bandage 100mm X 100m

Premier standard detailing fabric displaying outstanding workability and inherent strength. Suitable for a range of waterproofing applications where liquid membrane detailing or enhanced tensile strength is required. Provides excellent rupture resistance for liquid membranes over cracks, sheet...

Coreflute sheeting is a puncture resistant plastic product used predominantly to protect below ground waterproofing membranes from back fill and root growth.

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

Information ARDEX Multiprime ARDEX Multiprime is a water-based primer for improving adhesion of ARDEX products to various porous substrates. Water-based – no solvent hazard Quick drying Improves adhesion Substrates: Fibre-cement sheet Concrete, render, screeds Masonry and...

ARDEX WPM 3000X is a peel and stick SBS rubber modified bituminous/asphalt membrane.

Waterstoppage is chemically treated, granular sodium bentonite used as a detailing accessory product for CETCO Waterproofing systems.

MAXSEAL FOUNDATION MAXSEAL FOUNDATION ⠀is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry. It gives great protection to foundation concrete thanks to its high...

Gripset 51 Solvent Free Bitumen Rubber Membrane Bitumen rubber liquid membrane suitable for underground and external areas. Displaying excellent sealing and adhesion properties for waterproofing applications, Gripset 51 is also suitable as an anti rot and rust preventative coating over...

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

Gripset OP Non-Porous Surface Primer Solvent free primer specifically developed with adhesion enhancing properties on metals, and non absorbent substrates. Suitable for both vertical and horizontal surfaces, achieving high adhesion without the need for etching or using solvents.Outstanding...

Gripset LS External Trafficable Coating Durable hard wearing and nonslip membrane designed for external floor surfaces. Suitable for permanent exposure to varying climatic conditions, UV light and foot traffic. Use LS Roof Coat in conjunction with Gripset 38 as an exposed, trafficable...

Information ARDEX WPM 002 A rapid drying, two part waterproofing membrane specially designed for use under tiles. Advanced acrylic polymers – will not re-emulsify Rapid drying time, normally ready to tile in 16-24 hours Class III two component cementitious membrane that conforms to...

ARDEX P9 Single Part Primer is a water-based primer used for improving the adhesion of ARDEX products to smooth, dense and various non-porous substrates.